This kit will be shipping from end of January 2012

Limited Edition of 100 kits, so hurry as these are already going fast!

Also available from www.6v6.co.uk

Build your very own superheterodyne radio.

Easy assembly - all the components are mounted on a high quality silk-screened fibre glass printed circuit board.

Simple to follow instructions with schematics and wiring diagrams!  You get a manual, all the parts including silk screened printed circuit board, 4 tubes, sockets, tuning capacitor, Aerial, Oscillator and IF coils, 4 inch speaker, resistors, capacitors, wire, nuts and bolts etc.

Specifications

• Coverage: Medium Wave 500KHz to 1680KHz
• Connections: Aerial, Earth
• Tuning: Air Variable Capacitor with built in 3:1 reduction drive
• IF Frequency: 455KHz
• Tubes: (numbers in brackets are US types)
• DK91 (1R5) Mixer Osc
• DF96 or DF91 (1AJ4 or 1T4) IF
• DF96 or DF91 (1AJ4 or 1T4) AF
• DL95 (3Q4) Audio Output
• Dial: Linear scale
• Power 63 to 90 volts HT, 1.5 volts LT

You will need

• Soldering Iron
• Solder
• Wire Cutters/ Stripper
• Long Nose pliers
• M3 nut spinner (or use the pliers)
• Philips screwdriver
• Batteries (10 PP3 Batteries) and (1 D Cell)
• An optional Battery Eliminator is also available

All specifications subject to change without notice